Removal & Installation
WARNING: This page is about the Colt Base, Automatic, which is a different variant/trim than selected.
3 SPEED TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4.6 | C | |||
| Combination Procedure: CLUTCH SEALS: Remove & Replace: | ||||
| Front or Rear | 1.1 | 1.1 | A | |
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.5 | 0.3 | C | ||
| Combination Procedure: KICKDOWN BAND: Remove & Replace: | ||||
| 0.9 | 0.9 | A | ||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Front | 0.6 | 0.6 | B | |
| Combination Procedure: REACTION SHAFT: Remove & Replace: | ||||
| 0.6 | 0.6 | A | ||
| Combination Procedure: REVERSE BAND: Remove & Replace: | ||||
| 1.1 | 1.1 | A | ||
| Combination Procedure: SPEEDOMETER DRIVE GEAR: Remove & Replace: | ||||
| 1.5 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.2 | 0.2 | C | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.6 | 0.4 | C | ||