Removal & Installation

WARNING: This page is about the Durango 4.7 N, Automatic, which is a different variant/trim than selected.

4 AND 5 SPEED TRANS, TRANS ID - A500, A518, AW372, KM148, MR600, R4AC1, V4AC1,42RE, 42RLE, 42RH, 44RE, 45RFE, 46RE, 46RH, 47RE, 47RH, 48RE, 545RFE

Applies To	Standard Hours	Skill Level
4WD	4.0	B
Combination Procedure: EXTENSION HOUSING BUSHING: Remove & Replace:
	0.6	B
Combination Procedure: GOVERNOR ASSEMBLY: Remove & Replace:
	0.5	A
Combination Procedure: OUTPUT SHAFT BEARING: Remove & Replace:
Front	0.6	B
Rear	0.6	B
Combination Procedure: OVERDRIVE CLUTCHES & SEALS: Remove & Replace:
	1.0	A
Combination Procedure: OVERDRIVE DIRECT CLUTCH DRUM: Remove & Replace:
	1.0	A
Combination Procedure: OVERDRIVE DIRECT CLUTCH SPRING: Remove & Replace:
	0.8	A
Combination Procedure: OVERDRIVE HOUSING: Remove & Replace:
	0.7	A
Combination Procedure: OVERDRIVE OUTPUT SHAFT: Remove & Replace:
	1.2	A
Combination Procedure: OVERDRIVE SLIDING HUB: Remove & Replace:
	1.0	A
Combination Procedure: OVERDRIVE SUN GEAR: Remove & Replace:
	0.9	A
Combination Procedure: PARKING SPRAG: Remove & Replace:
	1.0	A