Removal & Installation
WARNING: This page is about the Durango 4.7 N, Automatic, which is a different variant/trim than selected.
4 AND 5 SPEED TRANS, TRANS ID - A500, A518, AW372, KM148, MR600, R4AC1, V4AC1,42RE, 42RLE, 42RH, 44RE, 45RFE, 46RE, 46RH, 47RE, 47RH, 48RE, 545RFE
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Trans Mfr CD 45RFE,4WD | 6.9 | 5.5 | C | |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: | ||||
| w/Dual Exhaust add | 0.3 | C | ||
| Where Skid Plate interferes add | 0.4 | C | ||
| Combination Procedure: AUTO TRANS CLUTCH: Overhaul: | ||||
| Front & Rear | 2.4 | A | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: FRONT PUMP: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: FRONT PUMP SHAFT &/OR SUPPORT: Remove & Replace: | ||||
| 0.5 | B | |||
| Combination Procedure: INPUT SHAFT: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: KICKDOWN BAND: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: LOW & REVERSE BAND: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.4 | B | ||
| Combination Procedure: OUTPUT SHAFT: Remove & Replace: | ||||
| 2.5 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANS OIL PUMP BUSHING: Remove & Replace: | ||||
| 0.6 | B | |||
| Combination Procedure: TRANS OIL PUMP HOUSING: Remove & Replace: | ||||
| Rear | 1.6 | B | ||
| Combination Procedure: TRANS OIL PUMP SUPPORT BUSHING: Remove & Replace: | ||||
| 0.7 | B | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||