LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> ProMaster 1500 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Air Temperature, Inlet >> Removal >> Inlet Temperature Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inlet Temperature Sensor

  1. Disconnect and isolate the negative battery cable.
  2. Remove the EGR cooler. Refer to COOLER, EXHAUST GAS RECIRCULATION (EGR), REMOVAL .
    GC0161960Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the inlet air temperature sensor wire harness connector (1).
  4. Remove the inlet air temperature sensor (2).
scientia non olet · About LEMON Manuals