Capacities And Recommended Fluids: Specifications
ENGINE
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| Cooling System | |||||
| Engine Coolant (3.0L Diesel Engine) | MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) | 12.7 Quarts | 12 Liters | 68163848AB | 68163848GB |
| Engine Coolant (3.6L Engine) | MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Material Standard MS-90032. | 10.5 Quarts | 10 Liters | 68163848AB | 68163848GB |
| Engine Oil with Filter | |||||
| Engine Oil (3.0L Diesel Engine) | Only use ACEA C3 5W-30 Synthetic Low Ash engine oil meeting Material Standard MS-11106 or Pennzoil Ultra Euro L full synthetic 5W-30 motor oil. | 9.5 Quarts | 9.0 Liters | 68001334PC | 68231014GA |
| Engine Oil (3.6L Engine) | We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. | 6 Quarts | 5.6 Liters | 68218890AB | 68218890GB |
| Fuel (approximate) | |||||
| Fuel Selection (3.0L Diesel Engine) | Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-975 with your diesel engine. This vehicle is compatible with biodiesel blends greater than 5% but no greater than 20% biodiesel meeting ASTM specification D-7467 provided the shortened maintenance intervals are followed as directed.
NOTE:
If climatized or diesel Number 1 ULSD fuel is not available, and you are operating below (20°F/-6°C), in sustained arctic conditions, Mopar Premium Diesel Fuel Treatment (or equivalent) is recommended to avoid gelling. |
24 Gallons | 90 Liters | - | - |
| Fuel Filter (3.0L Diesel Engine) | We recommend you use MOPAR Fuel Filter. Must meet 3 micron rating. Using a fuel filter that does not meet the manufacturers filtration and water separating requirements can severely impact fuel system life and reliability. | N/A | N/A | - | - |
| Fuel Selection (3.6L Engine) | 87 Octane, 0-15% Ethanol. | 24 Gallons | 90 Liters | - | - |
| Diesel Exhaust Fluid (DEF) | |||||
| 3.0L Diesel Engine | MOPAR Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage. | 5 Gallons | 18.9 Liters | 68035704AC | - |
| A/C Refrigerant System | |||||
| A/C | R-134a | 1.44 Pounds | 652 Kilograms | 82300101AC | 82300101GB |
| System fill capacity includes heater and coolant recovery bottle filled to MAX level. | |||||
| Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.8 L) if equipped with a rear heater. | |||||
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
|||||
SPARK PLUGS
| Description | Type | Gap | |
|---|---|---|---|
| U.S. | Metric | ||
| Spark Plugs (3.6L Engine) | Champion® | 0.043 in | 01.1 mm |
TRANSMISSION
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| Automatic | |||||
| 62TE Service Fill | MOPAR® ATF+4 Automatic Transmission Fluid | 5.5 Quarts | 5.2 Liters | 68218057AB | 68218057GB |
| 62TE Overhaul Fill | MOPAR® ATF+4 Automatic Transmission Fluid | 9.0 Quarts | 8.5 Liters | 68218057AB | 68218057GB |
| M40MTA Transmission | Full synthetic 75W-85 manual transmission fluid meeting the API GL4 specification. | N/A | N/A | 68083381AA | 68083381GA |
| M40MTA Control Unit | MOPAR® C Series DDCT SAE 75W Hydraulic Fluid or equivalent. | N/A | N/A | 68092638AB | 68092638GA |
| M40MTA Hydraulic Clutch Operating System | MOPAR® Brake and Clutch Fluid DOT 4 Motor Vehicle or equivalent. | N/A | N/A | 04549625AD | 04549625GD |
| Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. | |||||
| Failure to use the correct fluid may affect the function or performance of your transmission. | |||||
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
|||||
CHASSIS
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| Chassis Systems | |||||
| Brake Master Cylinder | We recommend you use MOPAR DOT 4. | N/A | N/A | 04549625AD | 04549625GD |
| Power Steering Reservoir | Use Pentosin CHF 11S power steering fluid meeting Material Standard MS-11655. | N/A | N/A | 68088485AB | 68088485GA |
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
|||||