LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1989 >> Premier ES >> Repair and Diagnosis >> Engine Performance >> System >> 2.5L Systems/Tests W/Codes >> Diagnostic Trouble Code (DTC) Identification >> ISA/ISC Connector Terminal Identification >> Manifold Absolute Pressure (MAP) Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure (MAP) Sensor

  1. Ensure MAP sensor vacuum hose connections are secure. Connect a voltmeter between MAP sensor terminal "B" (marked on sensor connector) and ground. Turn ignition on.
  2. Voltmeter should read 4-5 volts. Start engine and warm to operating temperature. Voltmeter should read 1.5-2.1 volts. Check ECU terminal "C6" for same voltmeter readings as measured at MAP sensor terminal "B" to check wire harness between ECU and MAP sensor. Repair as necessary.
  3. Turn ignition off. Connect voltmeter between MAP sensor terminal C and ground. Turn ignition on. Voltmeter should read 4.5-5.5 volts. Check for same voltmeter reading at ECU terminal "C14". See Figure . Repair wiring harness as necessary.
  4. Turn ignition off. Check for continuity between MAP sensor terminal "A" and ECU terminal "D3". Repair wire harness as necessary.
scientia non olet · About LEMON Manuals