LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1989 >> Premier ES >> Repair and Diagnosis >> Engine Performance >> System >> 3.0L Systems/Tests W/Codes >> Diagnostic Trouble Code (DTC) Identification >> Component Testing >> Starter Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Relay

  1. Turn ignition on. Starter relay is connected to vehicle during testing. Connect a voltmeter between Black/White wire and ground. Turn ignition switch to "START" position. Voltmeter should read battery voltage. If voltmeter does not read battery voltage, replace defective starter relay or repair open circuit from ignition switch.
  2. Connect voltmeter between 2 Green wires and ground one at a time on starter relay. Turn ignition switch to "START" position. Voltmeter should read battery voltage. If voltmeter does not read battery voltage, repair ground circuit.
  3. Connect voltmeter between Green/White wire and ground. Turn ignition switch to "START" position. Voltmeter should read battery voltage. If voltmeter does not read battery voltage, replace starter relay.
scientia non olet · About LEMON Manuals