Vehicles Tested Mode
- Vehicles tested mode is used to show what vehicles are covered by DRB-II cartridge. To access VEHICLES TESTED mode, turn ignition off. Attach DRB-II to BUS diagnostic connector. Connector is located under driver's side of instrument cluster.
- Turn ignition switch to RUN position. All DRB-II character positions will illuminate and copyright information will appear on screen. After a few seconds DRB-II menu will appear.
- At DRB-II menu, press "1" (VEHICLES TESTED) key. Press ENTER key. DRB-II will display vehicles covered by cartridge. Screen will display for 5 seconds and return to DRB-II menu.