Piston Ring Set: Remove & Replace

Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable). DOES NOT include Pin fit and/or align.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
O.H.C.- DOHC, All Cylinders		12.1		A
Additional Procedure: PISTON RING SET: Remove & Replace:
In-Line4, Where Air Cond interferes add		0.3		A
In-Line4, Where Pwr Strg interferes add		0.2		A
Combination Procedure: MAIN BEARINGS: Remove & Replace:
All		1.5		A
Combination Procedure: PISTON OR ROD PIN: Remove & Replace:
Each		0.3		A
Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct:
Per 3 Springs		0.2		A