LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1990 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L >> DRB-II Diagnostic Mode >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DRB-II Diagnostic Mode: Introduction

  1. Turn ignition off. Attach DRB-II Tester (C-4805) and Mitsubishi Adapter (MM1000) to diagnostic connector. Diagnostic connector is located next to a junction block above left kick panel. See Figure .
  2. Ensure all accessories are off. Turn ignition on. All character positions will illuminate and copyright information will appear on screen for a few seconds. If DRB-II screen is blank, refer to DRB-II PROBLEMS & ERROR MESSAGES in this article. The DRB-II will offer 4 menus: VEHICLES SUPPORTED, HOW TO USE, CONFIGURE DRB-II and SELECT VEHICLE.
scientia non olet · About LEMON Manuals