Ignition Coil Resistance (Eclipse 2.0L)
- Using a DVOM, measure primary coil resistance between ignition coil connector terminals No. 2 and No. 4 (coils for cylinders No. 1 and No. 4) and between terminals No. 4 and No. 1 (coils for cylinders No. 2 and No. 3). See Figure .
- Measure secondary coil resistance between coil towers for cylinders No. 1 and No. 4 and between coil towers for cylinders No. 2 and No. 3. See Figure
. Primary and secondary coil resistance should be within specification. See DIS IGNITION COIL RESISTANCE
table.DIS IGNITION COIL RESISTANCE Ohms @ 68°F (20°C)
Application Primary Secondary All Models .77-.95 10.3-13.9