LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Premier ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Verification Tests >> Verification Procedure VER-1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Verification Procedure VER-1

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Attempt to start engine. If engine does not start, return to TEST NS-1A. If engine starts, Single Board Engine Controller (SBEC) was changed and vehicle is equipped with factory theft alarm, start vehicle at least 20 times so alarm system may be activated when desired. No-start condition is corrected and repair is now complete. If engine is able to start and SBEC was not changed, connect DRB-II to engine diagnostic connector, and erase faults. No-start condition has been corrected and fault messages have been erased. Repair is now complete.
  2. If repaired fault resets, check all pertinent TECHNICAL SERVICE BULLETINS (TSBs), and return to TEST DR-1A if necessary. If another fault exists, return to TEST DR-1A and follow path specified by other fault. If no other faults exist, repair is now complete.
scientia non olet · About LEMON Manuals