LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Talon Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Abs Power Relay Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Power Relay Test

  1. Remove ABS power relay from behind right rear quarter trim panel. See ELECTRONIC CONTROL UNIT (ECU) & ABS POWER RELAY  under REMOVAL & INSTALLATION. Disconnect ABS power relay connector. Using ohmmeter, check for continuity between ABS power relay connector terminals No. 1 and 3. See Fig 1 . If continuity does not exist, go to next step. If continuity exists, replace relay.
  2. Check for continuity between terminals No. 2 and 4. If continuity exists, go to next step. If continuity does not exist, replace relay.
  3. Connect positive lead of 12-volt power source to terminal No. 2 and negative lead to terminal No. 4. Check for continuity between terminals No. 1 and 3. If continuity exists, relay is okay. If continuity does not exist, replace relay.
Fig 1: Testing ABS Power Relay
G91G08042Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals