LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Fuel System >> Control Relay >> 2.0L & 2.0L Turbo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.0L & 2.0L Turbo

  1. Remove control relay from vehicle. Control relay is located on right side of center console. Disconnect control relay connector.
  2. While applying battery voltage to control relay terminal No. 10, ensure battery voltage is not present at terminals No. 4 and 5. See Fig 1. While applying battery voltage to terminal No. 10 and grounding terminal No. 8, ensure battery voltage is present at terminals No. 4 and 5.
  3. While grounding terminal No. 6, ensure continuity is not present at terminals No. 2 and 3. While applying battery voltage to terminal No. 9 and grounding terminal No. 6, ensure continuity is present at terminals No. 2 and 3.
  4. Apply battery voltage to terminal No. 3. Ensure there is no voltage at terminal No. 2. While applying battery voltage to terminal No. 3 and grounding terminal No. 7, battery voltage should be present at terminal No. 2. Replace control relay if it does not test as described.
    Fig 1: Control Relay Terminal ID (2.0L & 2.0L Turbo)
    G90E06315Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals