LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> Fuel Evaporation >> Purge Control Solenoid Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Purge Control Solenoid Valve

  1. Mark purge control solenoid valve vacuum hoses for installation reference. Disconnect Black and Red-striped vacuum hose from purge control solenoid valve.
  2. Disconnect purge control solenoid valve electrical connector. Connect a hand-held vacuum pump to fitting where Red-striped vacuum hose was connected. Apply vacuum. Connect battery voltage to purge control valve terminals.
  3. On non-turbo models, when battery voltage is applied, vacuum should not hold; when battery voltage is disconnected, vacuum should hold. On turbo models, when battery voltage is applied vacuum should hold; when battery voltage is disconnected, vacuum should not hold.
  4. On all models, measure resistance between purge control solenoid valve terminals. Resistance should be 36-44 ohms at 68°F (20°C). Replace purge control solenoid valve if it does not function as described.
scientia non olet · About LEMON Manuals