LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L >> Verification Tests >> Test VER-2 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-2 - Verification Procedure

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION  . For appropriate wiring diagram, see WIRING DIAGRAMS  at end of article.
  1. Reconnect and reassemble all previously tested components. Turn ignition on. Ensure DRB-II is attached to diagnostic connector. Erase faults. Start engine. Allow engine to reach normal operating temperature. Increase engine speed to 2000 RPM for 10 seconds.
  2. Read faults. If faults exist, go to next step. If no faults exist, road test vehicle for a driveability problem. If a driveability problem does not exist, test is complete. If a driveability problem exists, after test driving vehicle, go to next step.
  3. Check for any TECHNICAL SERVICE BULLETINS (TSBs) related to this problem. If there are no TSBs, return to TEST DR-1A. If there are TSBs, repair as required.
scientia non olet · About LEMON Manuals