Engine Controls - System/Component Tests: Introduction

NOTE: For system and component testing on all models except Laser and Talon, see appropriate TESTS W/CODES article in the ENGINE PERFORMANCE Section.

Before testing separate components or systems, perform procedures in appropriate BASIC TESTING article in the ENGINE PERFORMANCE Section. Since many computer-controlled and monitored components set a trouble code if they malfunction, also perform procedures in appropriate TESTS W/CODES article in the ENGINE PERFORMANCE Section.

NOTE: Testing individual components does not isolate shorts or opens. Perform all voltage tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.