LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1993 >> Vision ESi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Diagnostic Procedure >> Entering On-Board Diagnostics >> SELECT SYSTEM Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SELECT SYSTEM Mode

  1. This mode enables technician to select system to be diagnosed. At DRB-II menu, press "4" (SELECT SYSTEM) key. Press ENTER key. DRB-II will display SELECT SYSTEM menu.
  2. At SELECT SYSTEM menu, press "3" (BODY) key. Press ENTER key. DRB-II should display BUS TEST IN PROGRESS, BUS OPERATIONAL. After a moment, SELECT MODULE menu should appear.
  3. If a bus failure message appears during BUS TEST IN PROGRESS, proceed to VEHICLE COMMUNICATIONS tests. Always start at TEST 1A - FAULT MESSAGES  .
scientia non olet · About LEMON Manuals