LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1994 >> Talon ES, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Direct Ignition System (2.0L) >> Power Transistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Transistor

  1. Connect analog ohmmeter leads between power transistor terminals No. 3 and 8. Ensure ohmmeter positive lead is connected to terminal No. 3. Ohmmeter should indicate no continuity. Using a 1.5-volt dry cell battery, connect positive battery lead to power transistor terminal No. 7 and negative lead to terminal No. 3. Perform STEP 1. See Fig 1 . When battery is connected, ohmmeter should indicate continuity.
  2. Connect ohmmeter between power transistor terminals No. 1 and 3. Ensure ohmmeter positive lead is connected to terminal No. 3. Ohmmeter should indicate no continuity. Connect 1.5-volt dry cell battery positive lead to power transistor terminal No. 2 and negative lead to terminal No. 3. Perform STEP 2. See Fig 1 . When battery is connected, ohmmeter should indicate continuity. Replace power transistor if it does not test as described.
Fig 1: Testing Power Transistor (2.0L)
G92H03969Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals