Piston Ring Set: Remove & Replace
WARNING: This page is about the Vision ESi, 3.3 T, which is a different variant/trim than selected.
Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable).
DOES NOT include Pin fit and/or align.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.3L Eng, All Cylinders | 9.6 | 6.8 | A | |
| Additional Procedure: PISTON RING SET: Remove & Replace: | ||||
| V6, Where Air Cond interferes add | 0.2 | 0.2 | A | |
| V6, Where Pwr Strg interferes add | 0.2 | A | ||
| Combination Procedure: MAIN BEARINGS: Remove & Replace: | ||||
| All | 1.5 | A | ||
| Combination Procedure: PISTON OR ROD PIN: Remove & Replace: | ||||
| Each | 0.3 | A | ||
| Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct: | ||||
| Per 3 Springs | 0.2 | A | ||