Electrical Load Switch: Galant
- Disconnect PCM connector. Proceed to the POWERTRAIN CONTROL MODULE (PCM) LOCATION table under COMPUTERIZED ENGINE CONTROLS. Using DVOM, measure input voltage between terminal No. 24 and vehicle ground. Turn headlights on. Measure voltage. Turn headlights off.
- Turn defogger on. Measure voltage. Turn defogger off. Depress brake pedal (except Galant). Measure voltage. Release brake pedal. If any measurement is less than battery voltage, check and repair malfunctioning circuit. See appropriate WIRING DIAGRAM under WIRING DIAGRAMS section.