Test 7E - Bus Short To Battery
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION
. For wiring diagrams, see appropriate article in ENGINE PERFORMANCE:
- WIRING DIAGRAMS - 3.3L
- WIRING DIAGRAMS - 3.5L
- After each repair, perform TEST VER-1.
- Replace instrument cluster. If resistance is more than 5 ohms, repair open Black/Light Green wire. If resistance is less than 5 ohms, go to next step.
- Check resistance of Blue instrument cluster connector terminal No. 11 (Black/Orange wire). If resistance is more than 5 ohms, repair open Black/Orange wire. If resistance is less than 5 ohms, replace instrument cluster.