LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Cruise Control Switch Function Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Switch Function Test

NOTE: If vehicle speed decreases approximately 9 MPH below set speed, set speed will be canceled.
  1. Cruise control switch is part of multifunction switch mounted on steering column. To operate cruise control system, turn cruise control switch to ON position. Ensure indicator light inside switch comes on.
    NOTE: Speed will not set beyond system limit of 90 MPH.
  2. With cruise control switch in ON position, drive vehicle 25-90 MPH. Press and release SET button. Vehicle speed should stay at set speed. Instrument cluster cruise indicator light should come on. To increase set speed, turn control switch to RESUME position and hold until new set speed is reached.
  3. To lower set speed, press SET button and hold until new set speed is reached. To return to set speed after cancellation, move RESUME switch to ON position. Vehicle speed should return to previous setting before cancellation. Set speed should cancel when any of the following occurs:
    • Brake pedal is depressed.
    • Clutch pedal is depressed.
    • Cruise control cancel switch is activated.
    • Cruise control main switch is turned to OFF position.
    • Ignition switch is turned to OFF position.
    • Transmission is shifted to Neutral or Park.
scientia non olet · About LEMON Manuals