LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Hydraulic Unit Relays >> Valve Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Relay

  1. Remove valve relay. Using a DVOM, check resistance between relay terminals No. 2 and 5. See Figure. Resistance should be 64-84 ohms. Check resistance between relay terminals No. 1 and 3. Resistance should be zero ohms.
  2. Check for continuity between relay terminals No. 3 and 6. Continuity should not exist. Apply battery voltage between terminal No. 2 and terminal No. 5. Check for continuity between terminals No. 1 and 3. Continuity should not exist.
  3. With battery voltage applied between terminal No. 2 and terminal No. 5, check for resistance between terminals No. 3 and 6. Resistance should be zero ohms. If relay does not test as specified, replace relay.
scientia non olet · About LEMON Manuals