Ignition Switch Test
WARNING:
All models are equipped with Supplemental Restraint System (SRS). To avoid injury from accidental air bag deployment, read and carefully follow all WARNINGS and SERVICE PRECAUTIONS. See appropriate AIR BAG RESTRAINT SYSTEM article in ACCESSORIES & EQUIPMENT. Failure to do so could result in accidental deployment of air bags and possible personal injury.
Disable air bag. See appropriate AIR BAG RESTRAINT SYSTEM article in ACCESSORIES & EQUIPMENT. Remove instrument cluster undercover. Remove steering column covers to locate ignition switch 6-pin connector. Disconnect ignition switch 6-pin connector. Put ignition switch in START position. Using an ohmmeter, check continuity between switch terminals No. 1 (White wire), No. 2 (Black/White wire) and No. 5 (Black/Red wire). If continuity is not present, replace ignition switch.