LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Talon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Non-Turbo >> Trouble Code Tests >> Test TC-25B - Idle Air Control Motor Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test TC-25B - Idle Air Control Motor Circuits

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION  Directory. For wiring diagram, see WIRING DIAGRAMS article.
  1. Turn ignition off. Disconnect Powertrain Control Module (PCM) connector. Inspect PCM connector for damaged or pushed out terminals. Repair as necessary. Perform TEST VER-2A. If PCM connector terminals are okay, go to next step.
    NOTE: For next step, see the IAC DRIVER IDENTIFICATION  table for IAC motor wire color identification.
  2. Using an external ohmmeter, check resistance of IAC motor driver No. 1 wire between IAC motor connector and PCM connector terminal No. 57 (Gray wire). If resistance is 5 ohms or more, repair open in IAC motor driver No. 1 wire. Perform TEST VER-2A. If resistance is less than 5 ohms, replace PCM. Perform TEST VER-2A.
scientia non olet · About LEMON Manuals