Connector Identification
WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, and 1996 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For terminal identification of body control system connectors, see Fig 1
-Fig 12
. Connector terminal numbers are molded into connectors. If connector terminal identification differs from that shown in figure, use wire colors to ensure correct circuit is being tested.
CONNECTOR IDENTIFICATION DIRECTORY
| Connector | See Fig. |
|---|---|
| Body Control Module 10-Pin Connector | Fig 1 |
| Body Control Module 14-Pin Connector | Fig 2 |
| Body Control Module 20-Pin Connector | Fig 3 |
| Body Control Module 22-Pin Connector | Fig 4 |
| Instrument Cluster Connector | Fig 5 |
| Ignition Switch Connector | Fig 6 |
| Multifunction Switch 7-Pin Connector Terminals | Fig 7 |
| Powertrain Control Module Connectors | Fig 8 |
| Relay Connector | Fig 9 |
| Transmission Control Module Connector | Fig 10 |
| Wiper Motor Connector | Fig 11 |