LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1997 >> Talon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Non-Turbo >> Trouble Code Tests >> Test TC-86B - Speed Control Switch Always High
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test TC-86B - Speed Control Switch Always High

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION DIRECTORY . For wiring diagram, see WIRING DIAGRAMS - NON-TURBO article.
  1. Condition to set trouble code is not present at this time. SPEED CONTROL SWITCH ALWAYS HIGH DTC sets if an open condition is detected in speed control ON/OFF switch circuit. Possible causes are: multiplexing switch(es) (speed control switches) shorted to power, multiplexing switch(es) (speed control switches) open, ON/OFF switch open or Powertrain Control Module (PCM) failure.
  2. Observe scan tool voltmeter. Wiggle wiring harness between speed control ON/OFF switch and Powertrain Control Module (PCM). If voltage varies, repair wiring harness as necessary where wiggling caused problem to appear. Perform TEST VER-2A. If voltage did not vary, problem is not present at this time. Perform TEST VER-4A.
scientia non olet · About LEMON Manuals