Spider 2000

If caster or camber is not within specifications, raise front of vehicle. Remove wheel and shock absorber.
Using spring compressor tool (A.74I74), compress spring to relieve lower control arm. Loosen nuts holding control arm pivot bar to crossmember.
To adjust caster, remove shims from front stud and move to rear stud to increase caster. To decrease caster, remove shims from rear stud and move shims to front stud. Reverse removal procedure and check caster.
To increase camber, remove equal amount of shims from both studs. To decrease camber, add an equal amount of shims to both studs. Reverse removal procedure and check camber.