Connecting Rod, Engine

CONNECTING ROD, ENGINE

Install the connecting rod cap and bearing with the tang on the same side as the rod.

Tighten the NEW connecting rod cap bolts 20 Nm (15 ft. lbs.) plus 40 degrees.






CONNECTING ROD

Piston Pin Bore Diameter 17.939 - 17.956 mm (0.7063 - 0.7069 in.)
Crank Journal Bore Diameter 45.128 - 45.138 mm (1.7767 - 1.7771 in.)

CRANKSHAFT CONNECTING ROD JOURNALS

Diameter 41.990 - 42.008 mm (1.6531 - 1.6539 in.)