Standard Procedure - Column Relearn
NOTE:
If the Electric Power Steering (EPS) column has been replaced, the following steps must be performed to ensure that the column is functioning correctly.
- Perform the Vehicle Trim Procedure. Refer to STANDARD PROCEDURE .
- Set the parking brake and start the engine.
- Place the transmission in Neutral.
- Starting with the steering wheel in the straight ahead position, turn the wheel in the following manner:
- All the way to the left until it stops.
- All the way to the right until it stops.
- All the way to the left until it stops.
- All the way to the right until it stops.
- Return the wheel to the straight ahead position.
- Verify that the steering assist works smoothly, with no hard points and/or sudden variation.
- Verify that the EPS warning light is not illuminated.