| Standard Trans | DOES NOT include wheel alignment. | 8.6 | | C |
| Combination Procedure: CLUTCH PILOT BEARING OR BUSHING: Replace: |
| Standard Trans | | 0.3 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: |
| Standard Trans | | 0.4 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: |
| Standard Trans | | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Replace: |
| Standard Trans, Rear | Includes: R&I Oil Pan. | 2.9 | | B |
| Combination Procedure: DIFFERENTIAL OUTPUT SEAL: Replace: |
| Standard Trans, Axle Shaft Oil Seal,Each | | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: |
| Standard Trans, w/Clutch Removed | | 0.5 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Replace: |
| Standard Trans, w/Release Bearing Removed | | 0.2 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Standard Trans | | 0.4 | | C |