LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2021 >> 500X Pop >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module, Power Inverter >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

  1. Connect the power inverter module wire harness connector.
  2. Position the power inverter module on the bracket, then install and securely tighten the fasteners.
  3. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, LOWER, REMOVAL AND INSTALLATION or GLOVE BOX, INSTRUMENT PANEL, UPPER, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals