Test Procedures
| VOLTAGE TESTS(1) | SPECIFICATIONS | CORRECTIONS | ||
|---|---|---|---|---|
| With Key On | ||||
| Pin #3 and engine ground | Battery voltage ±. 1V | Module bias test | ||
| Pin #5 and engine ground | Battery voltage ±.1V | Battery source test | ||
| While Cranking Engine | ||||
| Pin #1 and engine ground | 8 to 12 volts | Cranking test | ||
| Pin #5 and engine ground | 8 to 12 volts | Starting circuit test | ||
| Pin #7 and pin #8 | Any D.C. wiggle 1/2 V. min. | Distributor hardware test | ||
|
||||
| RESISTANCE TESTS(1) | SPECIFICATIONS | CORRECTIONS | ||
|---|---|---|---|---|
| With Key Off | ||||
| Pin #7 and pin #8 | 400 to 800 ohms | Magnetic pickup stator test | ||
| Pin #6 and engine ground | 0 ohms | |||
| Pin #7 and engine ground | more than 70, 000 ohms | |||
| Pin #8 and engine ground | more than 70, 000 ohms | |||
| Pin #3 and coil tower | 7, 000 to 13, 000 ohms | Ignition coil test | ||
| Pin #5 and pin #4 | 1.0 to 2.0 ohms | |||
| Pin #5 and engine ground | more than 4.0 ohms | Short test | ||
| Pin #3 and pin #4 | 1.0 to 2.0 ohms | Resistance wire test | ||
|
||||