LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1989 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> System >> EGR Function Testing >> EGR Valve >> Ported EGR Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ported EGR Valve

  1. Check vacuum lines for correct routing. Disconnect vacuum hose at EGR valve and plug hose. Disconnect idle air by-pass valve (EFI only).
  2. Connect vacuum pump to valve. Start engine. Apply 6-10 in. Hg to valve and hold. Engine speed should drop at least 100 RPM or stall. Vacuum should not drop more than 1 in. Hg in 30 seconds.
  3. Reconnect idle air by-pass valve (EFI only) and EGR vacuum hose.
  4. If system does not respond as indicated, test EGR control system should be tested. If testing is required, see appropriate COMPONENT TESTING article in the EMISSION section.
scientia non olet · About LEMON Manuals