LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1989 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Component Testing >> DISTRIBUTORLESS Ignition System (Dis) Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DISTRIBUTORLESS Ignition System (Dis) Module

  1. Turn ignition off. Using DVOM, connect negative lead to negative battery post and positive lead to DIS connector IGND terminal with connector attached. Resistance should be 5 ohms.
  2. If resistance is not as specified, verify module base plate and mounting screws are clean and tight. If base plate and mounting screws are okay, replace module.
scientia non olet · About LEMON Manuals