Test M - Introduction: Notes

NOTE: You should perform this test only when a Code 77 is received during QUICK TEST.

NOTE: To prevent replacement of good components, be aware that the following non-EEC related areas may be at fault:

Technician testing EEC system did not perform brief Wide Open Throttle (WOT) after Dynamic Response code.
Faulty mechanical engine components
Engine did not go over 2000 RPM during WOT
NOTE: This test is intended to diagnose only the following:
Throttle movement (Minimum 3/4 throttle).
RPM increase greater than 2000 RPM.

NOTE: If throttle is snapped open briefly, it may not be sufficient to pass the WOT test. Ensure that the throttle is depressed fully to WOT and that engine exceeds 2000 RPM.