Inertia Switch
- In event of a collision, electrical contacts in inertia switch open and fuel pump automatically shuts off. Fuel pump will shut off even if engine does not stop running. Engine will stop due to lack of fuel.
- It is not possible to restart engine until inertia switch is manually reset, which is accomplished by depressing the switch button. See INERTIA SWITCH LOCATION .
INERTIA SWITCH LOCATION
| Application | Location |
|---|---|
| Aerostar | On right kick panel, adjacent to front passenger's seat |
| Bronco II & Ranger | On floor board, right of transmission hump |
| Bronco & "F" Series | On left kick panel, near emergency brake pedal |
| "E" Series | Passenger's side cowl panel |
CAUTION:
DO NOT reset inertia switch until fuel system has been inspected for damage.