LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel Pressure Check >> Injector Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injector Check

  1. Connect tachometer to engine. Run engine at idle. Disconnect and reconnect injectors individually. If engine speed drops at least 100 RPM momentarily, injectors are okay. RPM drop should only be momentary as ISC will attempt to re-establish correct idle RPM.
  2. Replace any injectors that do not cause sufficient drop in engine speed. When test is complete, turn engine off. To check curb idle, refer to emission control specifications on decal in engine compartment or SERVICE & ADJUSTMENT SPECIFICATIONS article.
scientia non olet · About LEMON Manuals