LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Probe GL, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel Pump >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump: Installation

  1. Clean fuel pump mounting flange, fuel tank mounting surface and seal ring groove. to hold new seal ring in place during installation, apply a light coating of Long Life Lubricant (C1AZ-19590-BA) on seal ring.
  2. Install seal ring in fuel ring groove. Install fuel pump and sender assembly taking care not to damage nylon filter. Ensure locating keys are in keyways and seal ring remains in place.
  3. Tighten locking ring by rotating ring clockwise using Fuel Tank Sender Wrench (D84P-9257-A) until ring stops against stops. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals