LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Tempo Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Upper Intake Manifold >> Removal - 5.0L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal - 5.0L

  1. Disconnect wiring from air by-pass valve, TPS and EGR position sensor. Disconnect throttle and transmission linkages from throttle body. Remove cable bracket with cables attached and position out of way. Identify and disconnect all lines to upper intake manifold.
  2. Disconnect PCV system from fitting at rear of upper manifold. Remove 2 EGR coolant lines from fittings on EGR spacer.
  3. Remove nut retaining alternator bracket to upper intake manifold. Remove 2 bolts retaining alternator bracket to water pump and alternator. Remove bolts holding upper intake manifold to lower manifold. Remove upper intake as an assembly.
scientia non olet · About LEMON Manuals