LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Procedures >> Camber Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camber Adjustment

  1. The top mounting studs on front struts are offset. Camber is adjusted by rotating strut to different positions. See CAMBER/CASTER SPECIFICATIONS  table. Lift vehicle to unload suspension.
  2. Remove wheel. Remove top strut attaching nuts. Lower strut and rotate strut bearing to desired position. See Fig 1 . Reinstall strut into tower. Install and tighten attaching nuts.
Fig 1: Adjusting Camber
G91J07826Courtesy of FORD MOTOR CO.
CAMBER/CASTER SPECIFICATIONS (1)

Adjustment Mark Camber Angle Caster Angle
"A" 27 Degrees Zero Degrees
"B" 27 Degrees -28 Degrees
"C" Zero Degrees -28 Degrees
(1) Caster is set while setting camber by rotating strut to appropriate position.
scientia non olet · About LEMON Manuals