Power Circuits
Using a voltmeter, check for battery voltage between ECA terminal No. 1 (KAPWR) and ground. Check for battery voltage at terminals No. 37 and 57 (VPWR). If battery voltage is not present, power is not being supplied from EEC power relay. See CIRCUIT TEST B in TESTS W/CODES article in the ENGINE PERFORMANCE Section.
ECA LOCATION (1)
| Application | Location | ||
|---|---|---|---|
| Aerostar | Left Of Master Cylinder | ||
| Bronco & Pickup | Below Brake Fluid Reservoir | ||
| Explorer & Ranger | Behind Right Kick Panel | ||
| Van | Right Fender Apron, Under Blower Motor | ||
|
|||