LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EEC >> Fuel System >> Fuel System Testing >> Fuel Injector Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Test

  1. With engine idling or cranking (no start), use stethoscope to listen for consistent, operational sounds (clicking) coming from each injector. If operational sounds are present, go to FUEL INJECTOR LEAKAGE TEST. If operational sounds are not present, remove fuel injector wiring harness connector(s). Using DVOM, check injector resistance. Replace injector if resistance is not within specification. See FUEL INJECTOR RESISTANCE  .
  2. If injector resistance is within specification, connect Fuel Injector Tester/Cleaner (113-00001) to fuel injector wiring harness connector. Start engine. The continuity light should blink, indicating circuit is complete. If light does not blink, check for 12 volts at injector lead. If 12 volts is not present, repair circuit as necessary.
FUEL INJECTOR RESISTANCE

Application Ohms
1.8L & 2.2L Non-Turbo 12-16
2.2L Turbo 11-15
scientia non olet · About LEMON Manuals