LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Explorer 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Introduction >> Injection Timing - 7.3L Diesel >> Static Timing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Static Timing

  1. Remove fast idle bracket and solenoid from injection pump. Using Pump Mounting Wrench (T83T-9000-B), loosen nuts holding injection pump to pump mounting adapter. Install Rotating Wrench (T83T-9000-C) on front of pump, and rotate to align timing mark on pump mounting flange with timing mark on pump mounting adapter. See Fig 1.
  2. Align timing marks to within .030". Remove rotating wrench and tighten nuts to 84 INCH lbs. (9.5 N.m). Install fast idle bracket and solenoid.
Fig 1: Aligning Injection Pump Timing Marks
G90E14997Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals