LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Testing >> Test Re >> Re7
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Re: Re7

  1. Ensure ignition switch is in OFF position. Disconnect control module connector No. 2, flasher module connector and 20-pin CPU connector (if equipped with anti-theft system).
  2. Check resistance in Green/Red wire between connector No. 2 and flasher module connector and between control module connector No. 2 and CPU connector. If resistance is less than 5 ohms, replace control module. If resistance is 5 ohms or greater, repair Green/Red wire.
  3. Check resistance in Green/Red wire between control module connector No. 2 and chassis ground. If resistance is greater than 10,000 ohms, replace control module. If resistance is 10,000 ohms or less, repair Green/Red wire.
scientia non olet · About LEMON Manuals