LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Tests >> Pinpoint Test FSR-7 >> Continuity Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Check

  1. Ensure ABS fail-safe relay is disconnected. Verify ignition is off.
  2. Set VOM on 20-k/ohm scale. Check resistance at ABS fail-safe relay between terminal "b" and terminal "c". Resistance should be greater than 10,000 ohms.
  3. Set VOM on 200-ohm scale. Check resistance at ABS fail-safe relay between terminal "b" and terminal "f". Resistance should be less than 5 ohms.
  4. If resistances are as specified, go to PINPOINT TEST FSR-8  . If resistances are not as specified, replace ABS fail-safe relay.
scientia non olet · About LEMON Manuals