LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EEC-IV >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Ground Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuits

  1. Using a DVOM, check for continuity to ground on PCM terminals No. 40 and 60. See Figure. Resistance should be zero ohms. If resistance is not zero ohms, repair open to ground.
  2. Using a voltmeter, touch negative lead of voltmeter to a good ground. Touch positive lead of voltmeter to each ground terminal. With vehicle running, voltmeter should indicate less than 0.5 volt. If voltmeter reading is greater than 0.5 volt, check for open circuit, corrosion and loose connection on ground lead.
scientia non olet · About LEMON Manuals