LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/O Codes - EEC >> INTERMITTENTS >> Test Procedures >> Intermittent Simulation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intermittent Simulation

To reproduce the conditions creating an intermittent fault, use the following methods:

*  Lightly vibrate components.

*  Heat component.

*  Wiggle or bend wiring harness.

*  Spray component with water.

*  Remove/apply vacuum source.

Monitor circuit/component voltage or resistance while attempting to simulate intermittent. If engine is running, monitor for self-diagnostic codes. See G - EEC TESTS W/CODES article in the ENGINE PERFORMANCE Section. Use the results to identify a faulty component or circuit.

NOTE: For information on connecting test equipment, see G - EEC TESTS W/CODES article in the ENGINE PERFORMANCE Section.
scientia non olet · About LEMON Manuals