LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Explorer 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Ignition Timing >> Initial Timing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initial Timing

  1. Set transmission in Park or Neutral. Turn A/C and heater off. Connect inductive timing light to engine. With engine off, unplug in-line SPOUT (Yellow/Light Green wire near distributor) connector, or remove shorting bar from the double-wire SPOUT connector. Start and warm engine to normal operating temperature. DO NOT start engine with remote starter switch; use only ignition key.
  2. With engine at idle speed, check/adjust initial timing to 10 degrees BTDC. Turn engine off. Reconnect the single-wire in-line SPOUT connector or reinstall shorting bar on double-wire SPOUT connector. Start engine. Verify timing advances beyond initial setting. Remove test equipment and reconnect all components.
scientia non olet · About LEMON Manuals